Two-component, water-dilutable acrylic enamel designed for decorative and durable coating of metal surfaces, offering UV resistance, chemical resistance and strong mechanical performance.
5:1(by weight)
min. 2 hours
Stage 1: max. 1h
5 days
24 hours
Available as a pigmented 2K acrylic enamel system. The documented variant is Green RAL 6031-F9 Matt, with IR reflectance values measured across selected wavelengths.
| Product type | Two-component, chemically curing, pigmented acrylic enamel topcoat |
| Binder system | Water-dilutable reactive acrylic resin with aliphatic water-emulsifiable polyisocyanate |
| Documented color | Green RAL 6031-F9 Matt |
| Mixing ratio (A:B) | 5 : 1 by weight |
| Gel time / Pot life (20°C) | Must not gel within 2 hours |
| Drying time (20°C) | Stage 1: max. 1 h / Stage 6: max. 24 h |
| Recoating interval | 24 hours at 20°C / 1 hour at 60°C |
| Maximum film thickness | 35 – 40 μm per layer; total film thickness max. 80 μm |
| Full curing time (20°C) | 5 days |
| Full curing time (50–70°C) | 1 – 1.5 hours |
| Coating appearance | Uniform, matt |
| Adhesion | Grade 0 |
| Flexibility, Erichsen | min. 5 mm |
| Impact resistance | min. 40 cm / 1000 g |
| Gloss at 60° | ≥ 2 |
| Hardness, Persoz pendulum | min. 50% |
| Chemical resistance | Fully cured coating is resistant to water, petrol and oil |
| Coverage | 7 – 8 m²/kg |
| Reflectance values | 550 nm: 8–11 / 630 nm: 6–8 / 650 nm: 4–8 / 750 nm: 28–32 / 800 nm: 33–37 / 1200 nm: 30–34 |
| Application temperature | Substrate temperature above +10°C |
| Dilution | Deionized water, conductivity ≤ 20 µS/cm; recommended dilution approx. 20% |
| VOC content | max. 140 g/l |
| Shelf life | 12 months from date of manufacture; frost-sensitive, do not store below 5°C |
Before application, surfaces must be cleaned from adhering contaminants. Metal surfaces require proper preparation, while ceramics, stone, PVC, rubber, ABS, polystyrene and polycarbonate can be coated with the white IR UV version without priming. For aged rubber surfaces, the upper surface layer should be removed mechanically before coating.
Component B 001 is used for standard 5:1 acrylic enamel systems. For large-sized objects, relative humidity below 50%, or temperatures above 25°C, Component B 003 is recommended.
Detalied technical documents and test reports are available for download.
Our team is ready to help you find the best coating solution for your project.
This product is supplied as an exclusive distribution prodct ins partnership with:
