Two-component, water-dilutable elastomeric PUR coating designed for durable and flexible coating of tarpaulin, rubber, PVC and other elastic surfaces, with high UV resistance and infrared reflective properties.
6,5:1(by weight)
min. 2 hours
Stage 1: max. 1h
5 days
24 hours
| Product type | Two-component, chemically cross-linking elastomeric PUR coating |
| Binder system | Water-dilutable reactive PUR resin with aliphatic water-emulsifiable polyisocyanate |
| Mixing ratio (A:B) | 6.5 : 1 (by weight) |
| Gel time / Pot life (20°C) | Must not gel within 2 hours |
| Drying time (20°C) | Stage 1: max. 1 h / Stage 6: max. 24 h |
| Recoating time | 24 hours at 20°C / 1 hour at 60°C |
| Total curing time (20°C) | 5 days |
| Total hardening time (50–70°C) | 1 – 1.5 hours |
| Maximum layer thickness | 80 – 100 μm |
| Coating appearance | Even, silky matte surface |
| Adhesion | Grade 0 |
| Flexibility, Erichsen | min. 8 mm on steel |
| Elongation at break | 120% at 20°C |
| Impact resistance | min. 60 cm / 1000 g |
| Chemical resistance | Fully hardened coating is permanently waterproof |
| Coverage | 5 – 7 m²/kg/layer |
| Application temperature | Substrate temperature at least +10°C |
| Dilution | Clean, contaminant-free tap water |
| UV resistance | Satisfactory after more than 2000 hours QUV/SE UV-B 313 testing |
| IR reflective effect | Can reduce painted surface temperature by up to 10–15°C |
| VOC content | max. 130 g/l |
| Storage warranty | 36 months from date of manufacture |
| Packaging | Component A: 0.65 kg or 6.5 kg / Component B: 0.1 kg or 1 kg |
| Available colors | White, Red, Yellow, Dark Blue, Dark Green, Orange, Light Blue, Light Green, custom RAL / Pantone / NCS |
Before application, surfaces must be cleaned from adhering contaminants. Metal surfaces require proper preparation, while ceramics, stone, PVC, rubber, ABS, polystyrene and polycarbonate can be coated with the white IR UV version without priming. For aged rubber surfaces, the upper surface layer should be removed mechanically before coating.
Detalied technical documents and test reports are available for download.
For colored SOLAR GUARD PRO AQUA IR TR UV coatings, a white IR UV base layer is recommended first. After this base layer has dried, the selected colored IR TR UV layer can be applied.
Our team is ready to help you find the best coating solution for your project.
This product is supplied as an exclusive distribution prodct ins partnership with:
