Two-component epoxy-polyamide based protective coating system designed for corrosion protection, heat resistance and wear resistance on heavily stressed industrial surfaces.
1:1(by volume)
min. 4 hours
Stage 1: max. 5 h
max 12 days
24 hours
| Product type | Two-component epoxy-polyamide based protective coating |
| Mixing ratio (A:B) | 1 : 1 (by volume) |
| Gel time / Pot life (20°C) | min. 4 hours |
| Drying time (20°C) | Stage 1: max. 5 h / Stage 4: max. 48 h / Stage 5: max. 12 days |
| Drying time (70°C) | Stage 6: 5 hours |
| Recoating time | 24 hours |
| Heat resistance | Continuous exposure up to 100°C / intermittent exposure up to 120°C |
| Water resistance | Permanently water-resistant |
| Chemical resistance | Resistant to mineral oils, salt solutions, sulfuric acid, sodium hydroxide and natural gas |
| Salt spray resistance | min. 500 hours at 150 μm dry film thickness |
| Adhesion | Grade 0 |
| Flexibility, Erichsen | 4 mm |
| Impact resistance | min. 30 cm / 1000 g |
| Coverage | 5 m²/l/layer at 100 μm |
| Application method | Brushing or spraying |
| Recommended layers | 3 layers under severe chemical or mechanical exposure |
| Application temperature | Above +10°C recommended |
| Thinner | CATEPOX THINNER 203 |
| VOC content | 500 g/l |
| Storage warranty | 36 months from date of manufacture |
| Packaging | 1-liter containers or 22 kg steel cans |
| Available colors | Black / Grey |
Detalied technical documents and test reports are available for download.
Our team is ready to help you find the best coating solution for your project.
This product is supplied as an exclusive distribution prodct ins partnership with:
